Art Deco is the period most people picture when they think of antique jewelry: crisp platinum, white diamonds, a flash of sapphire or onyx, and lines so clean they still look modern a century later. We have bought and sold Art Deco pieces on Fifth Avenue since 1978, and it remains one of the eras clients ask about most. This guide covers where the style came from, how to recognize a true period piece, and what makes one worth more than another.
Shop our Art Deco jewelry collection
When was the Art Deco period?
Art Deco jewelry was made roughly between 1920 and 1935. The name came later, taken from the 1925 Exposition Internationale des Arts Décoratifs et Industriels Modernes in Paris, the exhibition that put the new style in front of the world. The look had been forming since the 1910s, and it carried on into the late 1930s, so any date you see on a piece is an approximation, not a birthday.
It sits between two other periods you will see on our site. Before it came the Edwardian era, known for lace-like platinum garlands and bows. After it came the Retro era of the late 1930s and 1940s, with big, bold rose and yellow gold.
Where the style came from
After the First World War, life changed fast. Women cut their hair short, raised their hemlines, drove cars and danced until dawn. Jewelry followed. The soft, flowing curves of Art Nouveau looked old-fashioned next to skyscrapers, ocean liners and machines, and designers stripped ornament down to geometry: straight lines, circles, steps and chevrons.
Travel and archaeology fed the style too. The discovery of Tutankhamun's tomb in 1922 set off a wave of Egyptian motifs, from lotus flowers to scarabs. Designers also borrowed from Chinese, Japanese and Indian art, which is why you see carved jade, coral and colorful carved gemstones in pieces from the period.
The look: geometry, white on white, and contrast
Two color schemes run through the period. The first is "white on white": diamonds set in platinum with nothing else, relying on pattern and sparkle. The second is high contrast: white diamonds set against blue sapphire, green emerald, red ruby, black onyx or coral. Both are built on symmetry. Fold a typical Art Deco brooch in half and the two sides match.
Platinum, white gold and the end of an era
Platinum was the defining metal of Art Deco jewelry. It is strong enough to hold stones with very little metal, which made the open, airy mountings of the period possible. White gold became popular as a less costly alternative with the same white look, and you will see it more often as the 1930s go on. Yellow gold appears too, mostly in later and simpler pieces.
During the Second World War, platinum was reserved for military use. Jewelers turned to gold, designs grew softer and larger, and the Retro style took over.
Diamond cuts and settings to look for
Cut is one of the best clues to age. In Art Deco pieces you will typically find:
- Old European cut diamonds: round, with a smaller table, a taller crown and an open culet you can often see as a small dot through the top of the stone.
- Single cut diamonds: tiny round diamonds with fewer facets, used as accents.
- Step cuts: baguettes, emerald cuts and Asscher cuts became hugely popular and are closely tied to the period.
- Calibré stones: small sapphires, rubies, emeralds or onyx cut to fit their setting exactly, so they sit in neat lines with almost no metal showing.
The metalwork is just as telling. Look for milgrain (tiny beaded edges along the metal), engraved sides and pierced or filigree galleries. In 1933, Van Cleef & Arpels patented its Mystery Setting, which held stones on hidden rails so a surface looked like solid color with no visible prongs.
The pieces of the period
- Engagement rings: an old European or step-cut center stone, often with baguettes or calibré sapphires on the sides, in a platinum mount with milgrain and filigree. Many of our vintage engagement rings come from this period.
- Sautoirs: long necklaces, often of pearls, that ended in a tassel or pendant and suited the dropped waistlines of 1920s dresses.
- Double clip brooches: two clips that could be worn together as one brooch or apart on a lapel or neckline.
- Line bracelets: flexible platinum bracelets of diamonds and colored stones, often stacked several at a time.
- Long drop earrings: short bobbed hair left the ears bare, so earrings grew longer.
- Bar pins and stick pins: slim, geometric and easy to wear today.
From our collection
Vintage Art Deco Era Platinum Sapphire & Diamond Brooch
A textbook example of Deco contrast: white diamonds against blue sapphire in a symmetrical platinum mount.
Vintage Art Deco Platinum Green Tourmaline & Old Mine Cut Diamond Bracelet
A flexible platinum line bracelet of old mine cut diamonds with green tourmaline, the kind of piece women of the 1920s stacked up the wrist.
The great houses
The Paris houses set the tone. Cartier, Van Cleef & Arpels, Boucheron and Chaumet all produced Art Deco work. Cartier's "Tutti Frutti" pieces, set with carved Indian rubies, emeralds and sapphires alongside diamonds, are among the most famous jewels of the era. Van Cleef & Arpels made a celebrated series of Egyptian-themed bracelets and brooches in the mid-1920s.
New York had its own strong Art Deco tradition. Cartier New York, Tiffany & Co., Oscar Heyman and Raymond Yard all made exceptional pieces, often with a more architectural, skyscraper feel. A signed piece from one of these houses, in original condition, is worth considerably more than an unsigned one of similar quality.
How to tell a true Art Deco piece from a reproduction
"Art Deco style" jewelry has been made ever since the 1920s, and much of what is sold online is new. A few things help separate period pieces from later ones:
- Diamond cut: a modern round brilliant with a tiny table point at the bottom and no visible culet is usually a sign of a later piece or a replaced stone.
- Metal and marks: look for platinum or white gold, with marks such as PLAT, IRID-PLAT or 18K. Many American pieces carry no marks at all, so the absence of a stamp is not a red flag on its own.
- Hand finishing: under a loupe, period milgrain and engraving show small irregularities from hand work. Cast reproductions look soft and uniform.
- Wear: a hundred years of wear softens edges and thins shanks in a natural way. Sharp, crisp edges on a piece claimed to be from 1925 deserve a second look.
The surest answer is an in-person look by someone who handles these pieces every day. You can book an appraisal with us or simply bring a piece in.
What affects the value of Art Deco jewelry
- Maker: a signed piece from a major house carries a strong premium.
- Metal: platinum generally brings more than white gold.
- The main stone: the size, color and clarity of the center diamond or gem, and whether a colored stone is natural and untreated.
- Originality: original stones and parts are worth more than pieces that have been altered, re-shanked or re-set.
- Condition: intact milgrain, filigree and engraving, with no missing calibré stones.
- Design: bold, unusual or well-documented designs bring more than common patterns.
Caring for Art Deco jewelry
Platinum is tough, but fine detail wears. Take rings off for the gym, gardening and heavy lifting. Clean with warm water, mild soap and a soft brush, and skip the ultrasonic for pieces with emeralds, opals, pearls, coral or many tiny calibré stones. Have prongs and settings checked once a year. Most repairs are simple when they are caught early, and our jewelry repair team works on period pieces regularly.
Buying and selling Art Deco jewelry with Louis Martin
Louis Martin Jewelers has been a family business since 1978, founded by Martin Mizrahi and now run with his son Harry. Every Art Deco piece we sell has been bought from a private collection and checked by our team for period, materials and condition before it is listed.
If you own an Art Deco piece you are thinking of selling, we offer free verbal evaluations and pay as soon as you accept an offer. Learn how selling works, or visit our showroom at 608 Fifth Avenue, Suite 702, Monday to Friday, 9:30am to 6:30pm.

